ultra-bright type led elite enterprises (h.k.) co., ltd. 10mm ultra-bright type flat 2505, 25/f., nanyang plaza, 57 hung to road, kwun tong, h.k. tel: (852) 2723-3122 fax: (852) 2723-3990 email: info@elite-ent.com.hk features package dimensions high intensity wide viewing angle general purpose leads reliable and rugged absolute maximum ratings at ta=25 parameter max. unit power dissipation 100 mw peak forward current (1/10 duty cycle, 0.1ms pulse width) 100 ma continuous forward current 40 ma derating linear from 50 0.4 ma / reverse voltage 5 v operating temperature range -40 to +80 storage temperature range -40 to +80 lead soldering temperature [4mm(.157?) from body] 260 for 5 seconds notes: 1. all dimensions are in millimeters (inches). 2. protruded resin under flange is 1.0mm (.04?) max. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice. part no. emitting color lens color peak wavelength p (nm) vf (v) i f = 20ma (note e1) iv (mcd) (note e2) viewing angle 2 1/2 (deg) (note e3) min typ min typ el-10r651 red red diffused 645 1.6 ? 1.8 350 ? 600 60 el-10g651 green green diffused 568 1.7 ? 2.2 150 ? 320 60 el-10y651 yellow yellow diffused 590 1.7 ? 2.0 350 ? 850 60 el-10r252 red water clear 645 1.6 ? 1.8 450 ? 2000 20 EL-10G252 green water clear 568 1.7 ? 2.2 400 ? 1100 20 el-10y252 yellow water clear 590 1.7 ? 2.0 800 ? 1800 20 el-10r253 red red transparent 645 1.6 ? 1.8 100 ? 450 20 el-10g253 green green transparent 568 1.7 ? 2.2 400 ? 1000 20 el-10y253 yellow yellow transparent 590 1.7 ? 2.0 800 ? 1800 20 parameter test condition luminous intensity i f = 20ma (note e1. luminous intensity is measured with a light sensor and filter combination that approximates the cie eye-response curve.) dominant wavelength i f = 20ma (note e2: the dominant wavelength ( d) is derived from the cie chromaticity diagram and represents the single wavelength which defines the color of the device.) peak emission wavelength i f = 20ma viewing angle (note e3. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.) spectral line half-width i f = 20ma forward voltage i f = 20ma reverse current i f = 20ma unit: mm (inches) tolerance: 0.25mm (.010?) max
|
